Call US：
86-532-86592677
Call US：
86-532-86592677Tel
DIN1478 Turnbuckle Jaw & Jaw.
Din1478 Turnbuckle Jaw & Jaw is recommended for straight or in-line pull only, commonly used for adjusting the tension or length of wire rope, aircraft cable, tie rod and other tensioning systems.
It consists of two threaded sections, each end screws into a metal frame, one with a left-hand thread and the other with a right-hand thread.
The tension can be adjusted by rotating the frame, which causes both sides bolts to be screwed in or out, without twisting attached rope or cable.
Same size with different end fittings are available: Hook & Hook, Eye & Eye, Hook & Eye.
| Technical Note | Conform to DIN1478 |
| Material | Body : Cold-drawn Seamless Steel Tube ( C1020 ) DIN 1478 turnbuckle Jaw End : C1020 / C1045 |
| Surface Finished | Zinc plated , Hot Dip Galv. |
| Size | M6 , M8 , M10 , M12 , M16 , M20 , M22 , M24 , M30 , M36 |
| Tips | Not for Lifting. Only suitable for use in tension. |
| Size | L1(mm) | L2(mm) | L3(mm) | Φ1(mm) | Φ2(mm) | Φ3(mm) | A(mm) | M(mm) | S.W.L | WT /pc. |
| kg | kg | |||||||||
| M6 | 110 | 88 | 58 | 15 | 11.2 | 6 | 8 | 6 | 230 | 0.15 |
| M8 | 110 | 105 | 65 | 17 | 14 | 8 | 10 | 8 | 440 | 0.26 |
| M10 | 125 | 125 | 75 | 21 | 16 | 8 | 12 | 8 | 440 | 0.45 |
| M12 | 125 | 145 | 85 | 25 | 18 | 10 | 16 | 10 | 600 | 0.66 |
| M16 | 170 | 170 | 100 | 30 | 22.8 | 10 | 20 | 12 | 800 | 1.51 |
| M20 | 200 | 184 | 115 | 34 | 27 | 12 | 24 | 16 | 1650 | 2.93 |
| M24 | 255 | 214 | 130 | 42 | 32 | 12 | 30 | 20 | 2600 | 5 |
| M30 | 255 | 251 | 140 | 51 | 38 | 16 | 36 | 24 | 3400 | 9.97 |
| M36 | 295 | 300 | 170 | 63.5 | 50 | 16 | 45 | 28 | 4800 | 14.8 |
Mobile phone webisite
Wechat contact
Tel